How to configure SD-WAN failover in Blockbit

Como configurar o SD-WAN failover no Blockbit

Fabio Azevedo · 2024-01-09T19:06:12+00:00

Acabei de contratar um novo link e gostaria de criar uma redundância dos links. Vi que tem o modulo de SD-WAN Blockbit NGFW, fui lá e criei um perfil nele, p...

Fabio Azevedo

I just hired a new link and would like to create a redundancy of the links. I saw that there's the SD-WAN Blockbit NGFW module, and I went there and I created a profile on it, but when they tested, it didn't link-turn.

Is there anything else I should do to function as desired?

Icaro Rocha

Hello. Fabio Azevedo , the services of Blockbit NGFW after configured need to be inserted into some policy for it to start working, in which case if you have using the "Failover" type you can configure it directly in Settings > Network> Gateway > SD-WAN and select the created profile, this will work for all default firewall connections. If you are using another mode of operation of SD-WAN as "Load Balance" among others, it is necessary to include in the direct routing tab in the IPV4 policy.

For more information:
https://docs.blockbit.com/display/RC/NGFW+-+Services+-+SD-WAN

infosmfSmf

Icaro Rocha Load Balance from what I understand needs to create an exit rule in IPV4 policies, is that right?

Icaro Rocha

infosmfSmf Exactly. You add to the "route" tab the policy you want to balance.

infosmfSmf

First of all, I would like to thank you for your attention.
Would you please give me a "practical" example of a similar rule please?